Menu
Your Cart

Victron BPR000220400 Battery Protect 12/24v 220A

Victron BPR000220400 Battery Protect 12/24v   220A
Victron BPR000220400 Battery Protect 12/24v   220A
Victron BPR000220400 Battery Protect 12/24v   220A
Victron BPR000220400 Battery Protect 12/24v   220A
Victron BPR000220400 Battery Protect 12/24v 220A
£38.69




The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.


The BatteryProtect is not designed for reverse currents from charging sources.


12/24V auto ranging


The BatteryProtect automatically detects system voltage.


Programming made easy


The BatteryProtect can be set to engage / disengage at several different voltages.


The seven segment display will indicate which setting has been chosen.


A special setting for Li-ion batteries


In this mode the BatteryProtect can be controlled by the VE.Bus BMS.


Ultra low current consumption


This is important in case of Li-ion batteries, especially after low voltage shutdown. Please see our Li-ion battery datasheet and the VE.Bus BMS manual for more information.


Over voltage protection


To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V respectively 32V.


Ignition proof


No relays but MOSFET switches, and therefore no sparks.


Delayed alarm output


The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.


Delayed load disconnect and delayed reconnect


The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected.


The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.







GBP : 38.69

Items returned in the same as new condition within 14 days of the original shipment date will be eligible for a full refund or store credit.

Refunds will be charged according to the original form of payment used for the purchase.

The customer is responsible for shipping charges during the return and shipping/handling charges of the original purchase are non-refundable.

All discounted items are final purchases.

Please contact us before shipping.


HELP

Contact us if you have any further questions and/or concerns;

E-Mail: [email protected]

Phone: +90 530 070 49 22

Free Shipping over $110

All orders are shipped within a maximum of one week.

You can contact [email protected] or our customer service for all details.

Write a review

Please login or register to review
This is the sticky Notification module. You can use it for any message such as cookie notices, special promotions, or any other important text.